Pioneer AVH-P6400CD - Manual (Page 44)

DAB Tuner
Service component function
If the currently received Service has a
Secondary Service Component (
EXTRA lights),
Service Component switching is possible.
1 Press
5 or ∞ to select
PRIMARY/SECONDARY from the DAB MENU,
and press A.MENU .
PRIMARY/SECONDARY adjustment indications
are displayed.
2 Press
2 or 3 to select the item you want to
adjust.
Service Follow Function
If reception of the selected Service worsens,
this automatically searches for other Ensemble
supporting the same Service. Depending on
conditions, an Ensemble supporting Alarm and
Road Traffic Flash is received.
1 Press
5 or ∞ to select
SF from the DAB
MENU, and press A.MENU .
SERVICE FOLLOW adjustment indications are
displayed.
2 Press
5 or ∞ to select ON or OFF.
Service Follow Function (FM)
When an Ensemble that supports the same
Service can’t be found, or when reception
conditions are poor, the Service Follow Function
switches to an identical FM broadcast. However,
switching is not possible if reception of a station
broadcasting an identical FM transmission is
poor, doesn’t exist or is not cross-referenced by
the DAB station.
During FM reception, if DAB finds a Service
identical to the original Service, and
reception is better, DAB reception resumes.
Selection is then performed in line with the
Service Component selected with the first
Service.
Notes
• Switch the Service Follow Function ON, and
the Service Follow Function (FM) is automati-
cally switched ON.
• The Service Follow Function (FM) is a DAB
function. If the initial source you listen to is
RDS (FM), there’s no switching to DAB.
• Even if you switch to an FM broadcast, the
button only functions during DAB operation.
When the “NET” indicator flashes
When the selected Service does not have broad-
cast station information for an identical FM
broadcast, if reception conditions for that
Service worsen, the “NET” indicator flashes to
indicate the Service Follow Function (FM) can-
not operate.
En 44
09
Section