Pioneer AVIC-F10BT - Manual (Page 122)

Selecting the video for
“Rear display”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the
“Rear display”.
% Touch [Rear Screen] on the “AV Source”
menu.
Each touch of [
Rear Screen] changes the set-
tings as follows:
! Mirror AV — The video on the front screen
of the navigation unit is output to the
“Rear
display
”
! Disc — The video and sound of the DVDs
are output to the
“Rear display”
! iPod — The video and sound of the iPod
are output to the
“Rear display”
! AV1 — The video and sound of AV1 are
output to the
“Rear display”
! AV2 — The video and sound of AV2 are
output to the
“Rear display”
p When [Mirror AV] is selected, the following
restrictions are applied to
“Rear display”.
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear
display
”.
— When playing back video files on the ex-
ternal storage device (USB, SD), the
“Video image” is not output.
p When Disc is selected, the following restric-
tions are applied to
“Rear display”.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When iPod is selected, the following restric-
tions are applied to
“Rear display”.
— The “Video image” and sound are output
only when the appropriate setting on
[
AV1 Input] is [iPod].
p When AV is selected, the following restric-
tions are applied to
“Rear display”.
— The “Video image” and sound are output
only when AV1/AV2 has both video and
sound.
— The “Video image” and sound are output
only when the appropriate setting on
[
AV1 Input] or [AV2 Input] are
[ Video].
Operating the picture
adjustment
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the handbrake. Refer to
“Important Information for the user” (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
Press and hold to display the
“Picture Adjust-
ment
” screen.
! Brightness — Adjusts the black intensity
! Contrast — Adjusts the contrast
! Colour — Adjusts the colour saturation
! Colour Temp. — Adjusts the tone of colour
(red is emphasised or green is emphasised)
! Dimmer — Adjusts the brightness of dis-
play
! [Camera] — Shows the picture adjustment
display for the rear view camera
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.
Other functions
Engb
122
Chapter
27