Pioneer AVIC-F10BT - Manual (Page 29)

Switching the view mode
Various types of screen displays can be se-
lected for navigation guidance.
2D map screen
3D map screen
Street View
Rear View
1 Display the
“Map Settings” screen.
2 Touch [View Mode].
The
“View Mode” screen appears.
3 Touch the type that you want to set.
You can select the following types:
! [2D View] (default):
Displays the 2D map screen.
! [3D View]:
Displays the 3D map screen.
! [Street View]:
Displays the
“Street View” screen.
p This type is available when the route is
set.
! [Rear View]:
Displays the rear view images.
p This type is available when [Back Cam-
era Settings] is set to [On].
= For details, refer to Setting for rear view
camera on page 71.
Setting the map colour change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
1 Display the
“Map Settings” screen.
2 Touch [Day/Night Display].
Each time you touch the key changes that set-
ting.
! [Automatic] (default):
You can change the colours of a map be-
tween daytime and nighttime according to
whether the vehicle lights are On or Off.
! [Day]:
The map is always displayed with daytime
colours.
p To use this function with [Automatic], the
Orange/white lead of the navigation system
must be connected correctly.
Changing the road colour
You can set the road colour to bluish or red-
dish.
1 Display the
“Map Settings” screen.
Customising the map screen settings
Engb
29
Chapter
05
Customising
the
map
screen
settings