Pioneer AVIC-F10BT - Manual (Page 52)

Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another one, you
must first delete one of the registered devices.
p If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the “Bluetooth Settings”
screen.
2 Touch [Registration].
The following message appears.
3 Touch [OK].
The
“Delete from Connection List” screen
appears.
4 Touch the Bluetooth device name that
you want to delete.
The registration is cancelled.
Connecting a registered
Bluetooth device
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
! Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
! You want to reconnect a disconnected
Bluetooth device.
! Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the
“Bluetooth Settings”
screen.
3 Touch [Connection].
The
“Connection List” screen appears.
4 Touch the name of the device that you
want to connect.
The
“Select Profile” screen appears.
Registering and connecting the Bluetooth device
Engb
52
Chapter
10