Customising preferences the options in the, Navi settings” menu 63, Displaying the “navi settings – Pioneer AVIC-F10BT User Manual

Page 63: Screen, Checking the connections of leads 63, Checking sensor learning status and, Driving status, The options in the “navi settings ” menu, Customising preferences, Displaying the “navi settings” screen

Advertising
background image

The options in the

“Navi

Settings

” menu

Displaying the

“Navi Settings”

screen

1

Press the HOME button to display the

“Top Menu”.

2

Touch [Settings].

The

“Settings Menu” screen appears.

3

Touch [Navi Settings].

The

“Navi Settings” menu appears.

Checking the connections of leads

Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.

1

Display the

“Navi Settings” screen.

2

Touch [Connection Status].

The

“Status” screen appears.

2
3
4
5

1

6

1 Speed Pulse

The Speed Pulse value detected by the navi-
gation system is shown. [0] is shown while
the vehicle is stationary.

2 GPS Antenna

Indicates the connection status of the GPS
aerial, the reception sensitivity, and from
how many satellites the signal is received.

Colour

Signal com-
munication

Used in posi-
tioning

Orange

Yes

Yes

Yellow

Yes

No

p When the GPS aerial is connected to

this navigation system, [

OK] is dis-

played.
When the GPS aerial is not connected to
this navigation system, [

NOK] is dis-

played.

p If reception is poor, please change the

installation position of the GPS aerial.

3 Handbrake

When the handbrake is applied, [

On] is dis-

played. When the handbrake is released,
[

Off] is displayed.

4 Power Voltage

The power voltage (reference value) pro-
vided from the vehicle battery to the naviga-
tion system is shown. If the voltage goes
out of the range from 11 V to 15 V, check
that power cable connection is correct.

5 Illumination

When the headlights or small lamps of a ve-
hicle are on, [

On] is displayed. When the

small lamps of a vehicle are off, [

Off] is dis-

played. (If the orange/white lead is not con-
nected, [

Off] appears.)

6 Back Signal

When the gear lever is shifted to

“R”, the

signal switches to [

High] or [Low]. (One of

these is displayed depending on the vehi-
cle.)

Checking sensor learning
status and driving status

p The navigation system can automatically

use its sensor memory based on the outer
dimensions of the tyres.

1

Display the

“Navi Settings” screen.

Customising preferences

Engb

63

Chapter

12

Customising

pr
eferences

Advertising