Pioneer AVIC-F10BT - Manual (Page 33)

[ Off]*:
Calculate a route that may include toll roads
(including toll areas).
[ On]:
Calculate a route that avoids toll roads (includ-
ing toll areas).
p The system may calculate a route that in-
cludes toll road even if [ On] is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
[ Off]*:
Calculate a route that may include ferries.
[ On]:
Calculate a route that avoids ferries.
p The system may calculate a route that in-
cludes ferry way even if [ On] is selected.
Avoid Motorway
This setting controls whether motorways may
be included in the route calculation.
[ Off]*:
Calculate a route that may include motorways.
[ On]:
Calculate a route that avoids motorways.
p The system may calculate a route that in-
cludes motorway even if [ On] is selected.
Time restrictions
This setting controls whether streets or
bridges have traffic restrictions during a cer-
tain time should be taken into account.
p If you want to set your route to avoid
opened bridges, select [ On].
[ On]*:
Calculate a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
[ Off]:
Calculate a route while ignoring traffic restric-
tions.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if [
On] is selected.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly (
=
Refer to Setting the time difference on page 69).
Learning Route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
[ On]*:
Calculate the route with the travel history
taken into account.
[ Off]:
Calculate the route without the travel history
taken into account.
[
Clear]:
Clear the current travel history.
Checking the current itinerary
You can check the route details.
% Touch [Profile] on the “Route confirma-
tion screen
”.
The
“Route Profile” screen appears.
Adding a waypoint
Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati-
cally or manually.
p When you set waypoints in the route to
your destination, the route up to the next
waypoint will appear in light green. The rest
of the route will appear in light blue.
= For details concerning operations, refer to
Adding a waypoint on page 35.
Setting a route to your destination
Engb
33
Chapter
06
Setting
a
route
to
your
destination