Pioneer AVIC-F10BT - Manual (Page 130)

3 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
4 Touch [+] or [
–] next to “Level” to adjust
the output level.
+6 to
–24 is displayed as the level is increased
or decreased.
5 Touch [c] or [d] next to
“Frequency(Hz)” to select cut-off fre-
quency.
Each time you touch [c] or [d], cut-off fre-
quencies are selected in the following order:
50 Hz
— 63 Hz — 80 Hz — 100 Hz — 125 Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate
HPF
(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1 Touch [HPF] on the
“AV Sound Settings”
menu.
= For details, refer to Displaying the “AV
Sound Settings ” menu on page 127.
2 Touch [HPF] to select cut-off frequency.
Each time you touch [ HPF] selects cut-off fre-
quencies in the following order:
Off
— 50 Hz — 63 Hz — 80 Hz — 100 Hz —
125 Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch [SLA] on the
“AV Sound Settings”
menu.
= For details, refer to Displaying the “AV
Sound Settings
” menu on page 127.
3 Touch [+] or [
–] to adjust the source vo-
lume.
+8dB to
–8dB is displayed as the source vo-
lume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! DVD-V and DVD-VR
! CD, ROM, DivX
! EXT1 and EXT2
! AV1 and AV2
! SD and USB
p The different source volume level can be set
between iPod and USB.
Enhancing bass (Bass Booster)
The
“Bass Booster” enhances bass sounds,
which can be muted by driving noise.
1 Touch [Bass Booster] on the
“AV Sound
Settings
” menu.
= For details, refer to Displaying the “AV
Sound Settings ” menu on page 127.
2 Touch [+] or [
–] to adjust the range from
0 to 6.
Customising preferences
Engb
130
Chapter
28