Pioneer AVIC-F10BT - Manual (Page 66)

4 Enter the following settings:
! [Distance]:
Enter the distance travelled since the pre-
vious fuelling.
p The distance is entered automatically
only when the distance travelled since
the previous fuelling is recorded.
! [Fuel Pumped]:
Enter the amount of fuel pumped.
! [Fuel Price Per Unit]:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to
“Fuel Mileage”.
5 Touch [OK].
The
“Fuel Mileage Setting” screen appears.
Exporting the data of
“Fuel Price
Calculation
”
Exporting the
“Fuel Price Calculation” data to
an SD memory card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
p If there is a previous data in the SD mem-
ory card, the data is overwritten with new
data when current data is exported.
1 Insert an SD memory card into the SD
card slot.
= For more details of the operation, refer to In-
serting and ejecting an SD memory card on
page 13.
2 Display the
“Navi Settings” screen.
3 Touch [Fuel Mileage].
The
“Fuel Mileage Setting” screen appears.
4 Touch [Export].
After a message confirming whether to export
the data appeared, exporting the data to the
SD memory card starts.
The
“Fuel Mileage Setting” screen appears
when it is done.
Recording your travel history
Activating the track logger enables you to re-
cord your driving history (called
“track log”
below). You can review the travel history later.
p If an SD memory card is inserted into the
SD card slot, the track logs will be stored in
the SD memory card.
1 Insert an SD memory card into the SD
card slot.
= For more details of the operation, refer to In-
serting and ejecting an SD memory card on
page 13.
2 Display the
“Navi Settings” screen.
3 Touch [Drive Log Settings].
The
“Drive Log Settings” screen appears.
4 Touch [Drive Log Settings].
Each time you touch the key changes that set-
ting.
Customising preferences
Engb
66
Chapter
12