Pioneer DV-668AV-S - Manual (Page 62)

Initial Settings menu 08
62
En
• When an HDMI component is connected,
the setting is automatically fixed to Down
Sample Off . However, 96kHz sources will
still be downsampled to 48kHz.
MPEG Out
• Default setting: MPEG > PCM
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to
MPEG , otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compatible.
Video Output settings
TV Screen
• Default setting: 16:9 (Wide)
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
When set to 16:9(Compressed) , progressive-
scan 4:3 material is shown with black bars on
either side of the screen.
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan&Scan) . In Letter Box
mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also
Screen sizes and
disc formats on page 81.
• You can’t change the video output setting
when an HDMI component is connected.
Component Out
• Default setting: Interlace
You only need to make this setting if you
connected this player to your TV using the
component video outputs.
If you have a progressive-scan compatible TV,
set this to
Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to
Interlace .
Check the operating instructions that came
with your TV if you’re unsure about its
compatibility.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
MPEG
MPEG > PCM
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
TV Screen
Component Out
AV Connector Out
S-Video Out
Still Picture
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
16:9 (Compressed)
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
TV Screen
Component Out
AV Connector Out
S-Video Out
Still Picture
Progressive
Interlace
Initial Settings
868en.book.fm 62 ページ ２００３年８月１９日 火曜日 午前９時３０分