Toshiba Magnia 3200 User Manual
Page 54
SCSI RAID Status screen (In the case of the RAID controller TAH/T100/T150)
Item Explanation
-Adapter-
Displays adapter information.
-Adapter Number-
Displays the adapter number.
-Logical Drive Count-
Displays the number of logical drives.
-PCI Bus Number-
Displays the number of the PCI Bus.
-PCI Slot Number-
Displays the number of the PCI slot.
-Driver Version-
Displays the driver version.
-Firmware Version-
Displays the firmware version.
-BIOS Version-
Displays the BIOS version.
-Controller Revision-
Displays the controller revision.
-Processor Revision-
Displays the processor revision.
-SPC Revision-
Displays the SPC revision.
-Cache Size-
Displays the size of the cache.
-Rebuild Priority In
Idle-
Displays the rebuild priority in the idle condition.
-Rebuild Priority In
Busy-
Displays the rebuild priority in the busy condition.
-HDD Patrol Priority-
Displays the priority of the HDD patrol.
-Buzzer Mode-
Displays the mode of the buzzer for the notice of an alert.
-Channel Count-
Displays the number of the channels.
-Battery Status-
Displays the status of the battery.
-Logical-
Displays information on the logical drive.
-Adapter Number-
Displays the adapter number.
-Logical Drive
Number-
Displays the logical drive number.
-Physical Drive Count- Displays the number of the physical drives.
-Hotspare
Management-
Displays the content of setting about the hotspare.
-RAID Level-
Displays the level of RAID.
-Stripe Size-
Displays the stripe size.
-Sub-array Count-
Displays the number of the array which constitutes the logical drive.
-RDC Policy-
Displays the content of setting about the cache for reading.
-WBC Policy-
Displays the content of setting about the cache for writing.
-Capacity-
Displays the capacity of the logical drive using the unit of MB.
-Logical Drive Status-
Displays the status of the logical drive.
-Group Status-
Displays the status of the RAID group.
-Auto Rebuild Mode-
Displays the mode of the auto rebuilding.
-Rebuild Status-
Displays the status of the necessity or the execution about the
rebuilding.
-Maintenance Status-
Displays the status of the execution about the maintenance
operation (An adjustment check, a parity generation or a deflag).
-Rebuild Progress-
Displays the progress of the rebuilding or the maintenance
operation using the unit of %.
-Booster Block Size-
Displays the block size of the RAID BOOSTER.
44