Toshiba Magnia 3200 - Manual (Page 79)

Item Explanation
System
Monitors the system information
-% Processor Time- Monitors the use ratio of the CPU.
-Processor Queue
Length- Monitors the Processor's waiting queue.
-Total Interrupts/sec-- Monitors the interrupt frequency of the hardware.
Memory
Monitors the memory information.
-Available Bytes- Monitors the rate of use of the physical memory.
-Page Faults/sec- Monitors the number/seconds of the page faults.
-Pages/sec- Monitors the total of the number by which the disk was written or
read when the page faults occurred.
-Pool Nonpaged
Peak- Monitors the maximum number of bytes of a nonpaged pool that
the server used at a certain moment.
-% Committed Bytes
In Use- Monitors the committed size of virtual memory
-Pool Nonpaged
Bytes- Monitors the number of Pool Nonpaged Bytes; the system memory
area for the objects that exist in the physical memory without writing
them to the disk.
-Pool Paged Bytes- Monitors the number of Pool Paged Bytes; the system memory area
for the objects which are enabled to be written when it is not in use.
Disk Monitors the disk information
-Disk- Monitors the used volume of the disk for each fixed drive.
Network Monitors the network information.
-Server Sessions- Monitors the number of server sessions.
-Errors Logon- Monitors the number of server logon errors.
-Work Item
Shortages- Monitors the frequency that STATUS_DATA_NOT_ACCEPTED is
returned during the receiving display time.
-Bytes Total/sec- Monitors the number of bytes that are sent between the server and
network.
-Current Commands- Monitors the demand numbers that are in the queue to wait
operation.
-Reads Denied/sec- Monitors the speed that the server denies receiving demand for
Raw reading.
-Writes Denied/sec- Monitors the speed that the server denies receiving demand for
Raw writing.
-Packets
Received/sec- Monitors the numbers/seconds of the packets received per network
adapter.
-Packets Sent/sec- Monitors the numbers/seconds of the packets sent per network
adapter.
Memo In case of the following condition, the Performance function writes in an event
log.
[Watch this item] check box in the performance set up screen is
checked.
[Write Event Log] check box is checked.
Each value continues exceeding Alert Level specified in this screen.
69