BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 12)

Setting up
11
To print out a list of all the functions of the On-
Air DECTf@x Plus, which allows you to see
them at a glance, along with the function codes
to carry them out, see ‘Printing out the
functions list’ on page 45.
There are a number of buttons which are used
to access the functions of your On-Air
DECTf@x Plus:
Button What it’s used for
Accesses the function menus
Confirms an entry or option
and selects the current menu
Exits the function menus. Any
changes which were not
confirmed will not be saved
Scrolls up through the menus
Scrolls down through the menus
Moves the cursor right or selects
a displayed menu item
Moves the cursor left and deletes,
and takes you back through menu
layers
Enables you to exit the current
function or go back through
the menus
Date and time
It is important that your On-Air DECTf@x Plus
is always set to the correct date and time.
This information is shown on the fax received
by the addressee and is required for faxes
programmed to be sent at a later date.
Setting the date and time
1 Press OK/Menu then 2 then 1 then
OK/Menu .
The display shows the date and time
currently programmed.
2 Use the keypad to enter the date. For
example, for 27th May 2001, 9.15, press
27
05 01 09 15 .
3 Press OK/Menu to confirm the entry.
Your On-Air DECTf@x Plus can now be used to
send and receive faxes.
1
AB
C 2
NOTE
Once the date and time have been set, if you want to
make a change press OK/Menu then 2 then 1 then
OK/Menu to access the date and time setting
function.
Use the ᮤ and ᮣ buttons to move left and right
through the display.