BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 68)

4 Press out the new smartcard (3) (pre-cut).
5 Insert the new smartcard (3) into its
support. Make certain that the chip (4) of
the smartcard (3) is positioned upwards,
with its bevelled corner on the left.
6 Return the smartcard support to its closed
position in the front cover. Once in place,
slide it upwards to lock it in and close the
front cover.
5 Gently pull the smaller spool towards you
and place it in its housing - there are two
slots that hold it in place close, the rear cover.
Replacing the smart card
The smartcard enables screen display, after
printout, of remaining ink ribbon.
1 With the front cover open, locate the green
smartcard support (1).
2 Press the smartcard support downwards to
unlock it. This will open automatically,
providing access to the used smartcard.
3 Remove the used smartcard (2) from its
support.
Help
67
The smartcard monitors how much print ribbon is
being used, and is always supplied with new print
ribbons. The fax machine will not work unless the
smartcard is installed.
If the smartcard is not installed or not properly
installed, the unit displays :
MISSING GAUGE.
1
2
3
3
4
3