BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 59)

Using additional handsets
58
To prioritise a base station
You can set a handset to give priority to a
particular base station, so that it will always
link up to that base station first if it is in range.
1 Press OK then 7 on the handset, then use
the ▲ and ▼ buttons to select the base
station number you want to prioritise.
2 Press OK to confirm your choice.
To deregister a handset
1 At the base station - press OK/Menu then 6
then 2 then OK/Menu . The display shows the
handset numbers that are registered.
2 Enter the number of the handset you want to
deregister (
1-4 ) then press OK/Menu to
confirm deregistration. If a handset is not
registered the display shows
INIT
=
OK 6.
AB
C 2
MN
O 6
Transferring calls
To transfer a call from the base station to a
handset
You can make or receive a call at the base
station and transfer it to a handset.
1 At the base station - press Hands free button
then OK/Menu then Recall . The base station
display will show HANDSET NUMBER.
3 Enter the number ( 1-4 ) of the handset you want
to transfer the call to. That handset will ring.
4 At the handset - when the handset rings,
press the
green button to take the call.
Transferring a call from one handset
to another
1 During a telephone call, tell the caller they
will be transferred.
2 Enter the number ( 1-4 ) of the handset you
want to transfer the call to. That handset will
ring. If you want to ring all the handsets at
the same time, press the ✱ button.
or
eg
AB
C 2
eg
A small square in the display indicates that no base
station is prioritised.