BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 29)

28
Using your handset
Switching the handset on and off
Your handset must be switched on before you
can use it to make or receive calls.
To switch the handset on
1 Press the green button. The display shows
the handset number. You can now make and
receive calls.
To switch the handset off
• Press and hold the red button until the
screen goes blank. The handset is now
switched off. When switched off, the handset
cannot receive calls.
Making and receiving calls
When making a call, your handset must be in
radio contact with the base station; the display
will show the handset’s registration number,
for example
- 1 -.
To make a call
1 If the handset is not switched on, press the
green button.
2 Press the green button again. The display
shows the Talk icon. The base unit display
shows HANDSET ON LINE.
3 Listen for a dialling tone and then dial the
number you require.
IMPORTANT
In order to use your On-Air DECTf@x Plus handset
the radio module must be connected to the base unit
and the base unit must be connected to both the
telephone line and power socket (see steps 1 & 2 of
‘ Setting up ’ on pages 8 and 9).
IMPORTANT
The new handset may not be charged. It takes up to
16 hours to charge completely.