Bell 36028 - Manual (Page 16)

How can I activate my
Caller ID?
company to confirm that the service is available before you install the
device.
For you Caller ID unit to function, you must first arrange with your
local telephone company to have Caller ID/Call Waiting ID service
installed on you line. There is an extra charge added to your monthly
telephone bill for this service. Before using this unit, please read this
instruction manual carefully.
RECEIVING NEW CALL
• When you receive a new call, the call information is stored under CALLER ID List. The "NEW"
segment of LCD Display and NEW CALL LED indicator will flash if there is new call(s).
• When you receive a call, the system displays the caller information sent by the telephone company,
called a Call Record. The Call Record consists of the following information:
a. The caller's name(if available)
b. The caller's telephone number
c. The time and date of a call
d. A call record number
• If there is no call records, the LCD display shows "NO CALLS"
VIEWING THE CALLER ID LIST
1. In standby mode, press CALLS button to enter Caller ID list. If there is new call(s), the new call(s)
will be displayed at first. If the name or number is more than 11 characters, press the SHIFT RIGHT
"•*" button to view the rest of the display.
2. Press UP 01' DN button to scroll to the next call. The DN button will go through the calls from the
last call received to the first. The LP button will allow you to view the calls from the first call
received to the last.
3. Press CALLS button to finish.
NOTE: If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to
STANDBY mode.
CALLER ID DISPLAY
LCD Display shows name and number, time and date of the call.
LCD Display shows number-only service.
"UNAVAILABLE" will be displayed when Caller ID information is
not available. This call was made from a telephone company that does
not offer Caller ID services(including international calls).
15 030206A-1