Bell 36028 - Manual (Page 21)

5. Press the SAVE/PHONE BOOK button to save the setting.
6. Press the MENU/SCAN button to go back to STANDBY mode.
A.
PRIVATE RING ON/OFF
Turn on or off ring or all calls where the caller has blocked their caller ID.
1. Press and hold the MENU/SCAN button.
2. Press the #9 button twice.
3. Press the EDIT/FLASH button.
4. Press the UP Or DN button to select ON or OFF.
PRIVATE RING ON is the preset mode.
5. Press the SAVE/PHONE BOOK, button to save the setting.
6. Press the MENU/SCAN button to go back to standby mode.
NOTE: The phone will ring once when set to OFF mode unless first ring is set to OFF mode.
UNAVAILABLE RING ON/OFF
Turn on or off ring or all calls where the caller has blocked their caller ID.
I. Press and hold the MENU/SCAN button.
2.
3.
4.
Press the #0 button once.
Press the EDIT/FLASH button.
Press the UP Or DN button to select ON or OFF.
UNAVAIL RING ON is the preset mode.
5. Press the SAVE/PHONE BOOK button to save the setting.
6. Press the MENU/SCAN button to go back to standby mode.
NOTE: The phone will ring once when set to OFF mode unless first ring is set to OFF mode.
ID SET (for Handset I and Handset 2) [ NOTE: ID SET had been preset at the factory. The user
doesn't need to do the ID SET. If the handset can not be linked up with base unit properly, please
reset the ID SET. (Reset ID SET: The user must delete the base ID, and then do the ID SET.) ]
1. Press and hold the SCAN/MENU button.
2. Press the * button once.
3. Press the SAVE/PHONE BOOK button.
The LCD will indicate PRESS PAGE.
4. Press and hold the page button until beeping on the handset, and then the handset will indicate
ID success.
DELETE BASE ID:
1. Press and hold the page button about 4 seconds, and then the base IN USE LED will light up .
2. Press and hold the page button about 2 seconds, and then the base IN USE LED will flash.
3. Press again the page button , and then the base IN USE LED will turn off.
ANSWERING MACHINE OPERATION
The 36028 features a sophisticated Digital Answering System. Incoming Messages (ICMs), Outgoing
Message (OGM) and Memo messages are stored electronically into digital memory. Messages are
accessed instantly and arranged compactly in this memory. The 36028 can store 15 minutes of message
(ICMs, OGM and Memos Combined).
NOTE: The maximum incoming Message (ICM) recording time is 1 minutes. The minimum incoming
Message (ICM) recording time is 3 seconds.
VOICE MENU SYSTEM
A sophisticated Voice Menu System has been designed and pre-programmed into the 36028. This system
will verbally guide you through key operational procedures.
030206A-1 20