Bell 36028 - Manual (Page 25)

The following table lists announcements made after you have pressed 9:
Message main menu
Repeat message
To skip message
Delete message
To stop function
Key
3
5
6
7
Action
Repeats the current message
Skips forward to the next message
Deletes current message
Stops current function
During message or memo playback
Replay previous message
Pause message
Change OGM1
Record new MEMO
Change security code
Switch answerphone off
Delete current message
Key press
33
4
*1
*2
*3
*5
6
Key(s)
*
1
2
#
Function
Skip OGM play
PlayOGMl
Room Monitor
End remote control operation
65,536 Combination Security Coding
The cordless telephone have a digital coding security system to prevent unauthorized use of your
telephone line by other cordless phones nearly. The cordless telephone have 65,536 possible security code
combinations. Each combination of the code is randomly generated every time the handset is picked up.
Resetting Security Code and Channel
Communication between the handset and the base unit may not be possible in any of the
following situations:
1. After a power failure.
2. After relocating the base unit by disconnecting the AC adapter..
3. After replacing the handset battery.
4. The handset goes out of range from the base unit.
To reset, place the handset on the cradle of the base unit for five seconds.
IMPROVING CORDLESS RECEPTION
Follow these guidelines to improve cordless sound quality:
• Select an area to install the unit where it is closest to the center of your home or office. This will
improve the operating range of the unit.
• Keep the base unit away from electrical equipment. Radio Frequency Interference (RFI) is
sometimes generated by these appliances, which can cause a degradation in cordless reception.
• Keep the handset batteries charged as much as possible. Weak handset batteries can limit the range
of cordless operation.
030206A-1 24