Bell 36028 - Manual (Page 20)

TIME SET
Set the date and time.
5.
Press and hold the MENU/SCAN button.
Press the TELEPHONE KEYPAD #4 button.
Press the EDIT/FLASH button.
Use the TELEPHONE KEYPAD button to enter the month, date, hour and minute. The cursor
moves automatically after entering each item.
Press the TELEPHONE KEYPAD #1 for AM setting, or
Press the TELEPHONE KEYPAD #2 for PM setting.
When the final setting is programmed, the time and date arc 'automatically saved.
6. Press the MENU/SCAN button to go back to STANDBY mode.
NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service
from your local telephone company.
E. AREA CODE
1. Press and hold the MENU/SCAN button.
2. Press the TELEPHON KEYPAD #5 button.
3. Press the EDIT/FLASH button.
4. Use the TELEPHONE KEYPAD buttons to enter the three digit area code.
5. Press the SAVE/PHONE BOOK button to save the setting.
6. Press the MENU/SCAN button to go back to standby mode.
F. CONTRAST
This unit enables you to select 3 brightness levels for the Large LCD Display.
1. Press and hold the MENU/SCAN button.
Press the TELEPHON KEYPAD #6 button.
Press the EDIT/FLASH button.
Press the UP or DN button to adjust the brightness of the
display. Level 2 is the preset brightness.
Press the SAVE/PHONE BOOK button to save the setting.
Press the MENU/SCAN button to go back to standby mode.
2.
3.
5.
6.
MSG WAITING (Message Waiting)
To turn off the Message Waiting LCD/LED indicator.
1. Press and hold the MENU/SCAN button.
2. Press the TELEPHON KEYPAD #7 button.
3. Press the EDIT/FLASH button.
4. Press the SAVE/PHONE BOOK button, the Message Waiting LCD/LED indicator turn off.
5. Press the MENU/SCAN button to go back to STANDBY mode.
IMPORTANT: Message Waiting LCD/LED indicator will automatically turn on, If you have
subscribed to Voice Mail message service and if you have Visual Message indication from your local
telephone company.
H. A UTO ANSWER ON/OFF
Turn on or off the auto answer feature. When in on mode, the phone
will automatically answer an incoming call if the handset is lifted
from the base unit.
1. Press and hold the MEMU/SCAN button.
2. Press the TELEPHON KEYPAD #8 button.
3. Press the EDIT/FLASH button.
4. Press the UP Or DN button to select ON or OFF. AUTO ANSWER ON is the preset mode.
19 030206A-1