Bell 36028 - Manual (Page 7)

DESCRIPTIONS
030206A-1 6
EDIT/ FLASH Button -(EDIT) Press to edit listed items. (FLASH) Momentarily hangs up the phone to
access custom calling features such as Call waiting or Three-way calling provided by you local phone
company.
UP /DN Button - Allows you to adjust the handset volume (3 steps) in TALK mode. It also allows you to
view the caller list or /and Phone.
Microphone - Used for speaking with callers.
Headset Jack - A jack located on the side of the handset used for connecting your headset to enjoy a
hands-free communication.
RE/PA/DEL(Redial/Pause/Deletc) Button - (Redial)Press to redial the last number you
dialed.(Pause)Press to insert pause while dialing. (Delete)Press and hold down to delete items.
Calls Button - Press to see the caller list.
OPT (Option) /TRANSFER Button - During you view the caller list, press to place a long distance call
or to place a local call. Allow you to transfer to other handset during a call. During a call, the source
handset user can press the OPT/TRANSFER button followed by destination handset. The call is quick
transferred to the destination handset, it starts ringing and shows "TRANSFER". If destination handset
user does not answer the call with 30 sec, source handset will be ring back for 30 sec.
MENU/SCAN - While in standby mode, this button allows you to set the handset in
Programming mode. While in Talk mode. It is used to manually select one of the 40
operating channels when you experience interference on the handset.
Receiver - Allows you to hear calls.
BASE UNIT CONTROLS:
Base Unit Charge Terminals - Used for charging handsel batteries. We recommend that you clean these
contacts periodically with an alcohol-moistened cloth or cotton swab.
IN USE Indicator -Lights up steadily when the phone is in talk mode and turns off when the handset is
not in use.