Britax ROUND ABOUT 50 - Manual (Page 25)

23
6 Attach one LATCH connector to its adjacent
vehicle LATCH anchor (Fig. D) in the upright
position (Fig. E).
• An audible click confirms attachment.
• Ensure that the LATCH strap is not twisted.
TIP: You may need to turn the back of the child
seat toward you for easier access to the vehicle
LATCH anchor.
7 Attach the remaining LATCH connector to its
adjacent vehicle LATCH anchor (Fig. F) in an
upright position (Fig, E).
• An audible click confirms attachment.
• Ensure that the LATCH strap is not twisted.
NOTE:
If an audible click is not heard when
connecting either LATCH connector, the LATCH strap
may be twisted, or there may be debris in the LATCH
connector. Correct either situation before continuing
with the installation process.
8 Push the child seat into the vehicle seat while
pulling the LATCH strap tight (Fig. G).
IMPORTANT: Ensure the LATCH strap does not fold
into the LATCH adjuster while tightening.
9 Attach the Versa Tether ® hook to the vehicle’s
designated tether anchor for the chosen
seating position. Remove all slack from the
tether to secure. Store excess webbing in the
tether pouch. See pages 29 – 32.
10 Verify that all connections are secure and that the child seat is stable.
• The child seat is secure when it cannot be moved front- to-back or side-to-
side more than 1 in. (2.5 cm) at the belt path. If the child seat is not secure,
repeat the installation process or use an alternate seating location.
WARNING! Refer to your vehicle owner’s manual or
contact the vehicle manufacturer for the maximum weight rating for
their LATCH anchors. Use vehicle belt (not LATCH connectors) for
installations with children who weigh more than the vehicle LATCH
anchor limit. Unless specified otherwise by the vehicle manufacturer,
assume a 40 lbs (18.1 kg) child is the vehicle LATCH anchor limit.
Installation: Forward-Facing
F
G
E
Top Release
Button