Britax ROUND ABOUT 50 - Manual (Page 41)

39
Securing Your Child
Once the child seat has been installed in the vehicle
and adjustments have been made, follow these
instructions to secure the child.
1 Loosen the harness by lifting the harness
adjuster lever while pulling both shoulder straps
forward (Fig. A).
2 Release the chest clip by squeezing the tabs
and sliding pieces apart (Fig. B).
3 Unfasten the harness buckle by pressing the
release button and sliding the tongues out.
4 Move the harness straps to the side of the child
seat. Use the harness holder located on the
straps and side of the cover to aid in holding
the straps.
5 Place child in the child seat.
6 Position the harness straps around the child
and fasten the harness buckle (Fig. C) and
chest clip (Fig. D).
• Proper connection of the harness buckle is
confirmed with an audible click after inserting each
buckle tongue (see diagram below).
Securing Your Child
A
b
D
C
CLICK
x 2