Bay Technical Associates DS2-RPC - Manual (Page 12)

DS-RPC OWNER’S MANUAL
INTRODUCTION TO THE DS-RPC
__________________________________________________________________________________________
4
PROGRAMMABLE FEATURES OF THE DS MODULES
(con’t)
FEATURE DESCRIPTION ACTION PAGE
NO.
DS71-MD2 H OST M ODULE
Rings to
Answer(*) The number of times the modem rings
before it automatically answers.
Default = 2 rings Enter number of rings to
auto answer 45
Modem to
Modem
Xon/Xoff(*) ASCII character used to stop or start
transmission of data.
Default = Disabled Enable/ Disable Modem to
Modem 46
Connectivity
Timeout(*) Configures the amount of connectivity
(5 to 255 minutes) before modem
disconnects. Default = 60 minutes Enter timeout in minutes.
Enter 0 to disable 47
Escape
Character(*) Allows ASCII characters to be
interpreted as commands instead of data.
Default = 43 (+) Enter the character you wish
to use as an escape 48
Unit ID Unique ID for DS-Series unit.
Default = DS71 or DS71-MD2 Enter unit ID 48
DS74 P ERIPHERAL I/O M ODULE
Serial Port
Configuration Sets serial port speed for each I/O port
on the DS74. Default = 9600, 8, 1, N,
Xon/Xoff Disabled, RTS/DTR Low Enter baud rate, data bits,
stop bits, parity, Xon/Xoff,
and DTR/RTS line driver 51
Port Device
Name Unique ID for each I/O port as displayed
on the main menu. Default = Device A,
Device B, Device C, Device D, etc. Enter port device name 52
Table 1 (con’t)