Bay Technical Associates DS2-RPC - Manual (Page 30)

DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
22
Device A (2,1)...............1
Device B (2,2)...............2
Device C (2,3)...............3
Device D (2,4)...............4
DS-RPC (3,1)…………5
Configure.................................C
I/O Modules Reset..................RM
Unit Reset................................RU
Exit.........................…...............X
Logout.......................................T
Enter Request:
NOTE: Depending on the DS-RPC model, the menus may vary
according to the number of DS74 modules installed in the unit.
If this is not an initial set-up and Password
has already been enabled, you are prompted
to login. After logging in successfully,
invoke the main menu by sending the
attention character five times (;;;;;).
NOTE: Password feature is case sensitive.