Bay Technical Associates DS2-RPC - Manual (Page 49)

DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
41
To toggle Password status, select #2,
“Enable/Disable,” followed by <cr>. The
DS71 or DS71-MD2 module displays the
current status and asks if you want to enable:
Password is ......................... Disabled
Enable? (Y/N, CR for no change):
Enter “Y“ for yes followed by <cr> if you
want to enable Password. Type “N“ for no
followed by <cr> if you want to disable
Password. Enter <cr> no change.
Menu Enable/Disable Menu upon login. Default
menu is enabled. If disabled,the following
header appears upon login without the main
menu:
Data Switch Series - F.2.01
Bay Technical Associates
Unit ID: DS71-MD2
Port Select Code: $BT
Attention Character: ;
NOTE: This header may appear different depending on type of
module installed.
NOTE: To invoke the main menu when disabled, enter the attention
character five times (;;;;;).