Saving your settings, Saving settings to non-volatile memory, Saving settings to a file – Black Box 16 port User Manual
Page 111: Modems, Saving
Black Box Console Server user guide
111
Saving your settings
Saving settings to non-volatile memory
1.
After making changes to the configuration, exit the text menu screen (form) you
are using.
The ‘options’ form now appears:
2.
Within the options form select ‘accept and exit form’ to retain your changes in
RAM (volatile memory).
3.
To save your changes permanently exit the text menu system completely then
return to the Main Menu and select ‘command line mode’;
The exit full screen mode form is now displayed:
4.
Within the ‘exit full screen mode’ form select ‘exit and save changes’.
All the changes made since last entering the menus will be saved to FLASH
(permanent, non-volatile) memory.
You will now be at the command line prompt.
5.
To return the menus, at the command prompt, type: screen
Saving settings to a file
netsave
You can also save your configuration information to a file on a host. This can
only be done in the cli; see