Saving configuration changes, Saving to non-volatile memory – Black Box 16 port User Manual
Page 62
Black Box Console Server user guide
62
Saving configuration changes
Saving to non-volatile memory
To save your configuration settings to non volatile memory proceed as follows;
1.
After making changes to the configuration exit the text menu screen (form) you
are using.
The ‘options’ form now appears:
2.
Within the options form select ‘accept and exit form’ to retain your changes in
RAM (volatile memory).
3.
To save your changes permanently exit the text menu system completely then
return to the Main Menu and select ‘command line mode’;
The exit full screen mode form is now displayed:
4.
Within the ‘exit full screen mode’ form select ‘exit and save changes’.
All the changes made since last entering the menus will be saved to FLASH
(permanent, non-volatile) memory.
You will now be at the command line prompt.
5.
To return the menus, at the command prompt, type: screen