Aui port – Black Box 16 port User Manual
Page 128
Advertising
Black Box Console Server user guide
128
AUI port
The port labelled AUI, on the rear panel, is a 15-way female D-type. Pin-outs are:
Note
To use the AUI port on Console Server units equipped with Revision 2 boards you
need to select the AUI interface during initial configuration using CLI commands.
See
Selecting AUI or 10/100 Base T interface on page 32
Pin
Signal
Pin
Signal
1
Ground/chassis link
9
Collision-
2
Collision+
10
Data Out-
3
Data Out+
11
Ground
4
Ground
12
Data In-
5
Data In+
13
+12 volt
6
Ground
14
Ground
7
do not connect
15
do not connect
8
Ground
Advertising
This manual is related to the following products: