Black Box 16 port - Manual (Page 245)

Black Box Console Server user guide 245
To access
JETset
1. Make sure you set ‘gui_access’ to ‘on’, see Chapter 2 Installation
2. Open your web browser and enter the ip address of your Console Server; e.g.
http://192.101.34.211
You should be presented with the login page:
The program prompts you for a password (for user of name ‘admin’).
Caution the only access permitted is username ‘admin’. Console Server assumes this
username and so prompts you for the password for this user.
On successful login you will be presented with the JETset home page ( JETsethome page
on page 244 on page 244). From the home page you can now configure your unit.