AEM 30-2860 Coil-On-Plug COP Conversion Kit - Manual (Page 18)

Page 18 10-2860 B Series COP Instructions RevB 111117
EMS Pin Locations
Relevant pin locations for the 30-6040, 30-6050, and 30-6060 Series 2 EMS units are
shown below in Table 4.
PIN EMS 30-6040 EMS 30-6050 EMS 30-6060
EPM
Harness
COP
Harness
Coil 1 A21 C4 A20 NA Orange
Coil 2 B6 C12 B7 NA Blue
Coil 3 B3 C13 B9 NA Pink
Coil 4 B4 C14 B10 NA Grey
Cam B11 C29 C4 White NA
Crank B15 C8 C2 Green NA
Pwr Gnd A23 A24 A26 B2 B2 B10 B20 B22 A9 A10 A22 A23 Drain NA
SW +12 A25 B1 C1 A21 B9 A11 A24 C6 Red NA
Snsr Gnd D21 D22 A7 A31 C7 C18 D9 D11 D12 D13 Black NA
Relevant pin locations for the 30-1040, 30-1050, and 30-1060 Series 1 EMS units are
shown below in Table 5. Take notice that the Series 1 EMS units use the #5 coil driver
on cylinder 4. The Series 2 EMS units use the #4 coil driver on cylinder 4.
PIN EMS 30-1040 EMS 30-1050 EMS 30-1060
EPM
Harness COP Harness
Coil 1 A21 B13 A20 NA Orange
Coil 2 B6 C12 B7 NA Blue
Coil 3 B3 C13 B9 NA Pink
Coil 5 B4 A1 B19 NA Grey
Cam B11 C29 C4 White NA
Crank B15 C8 C2 Green NA
Pwr Gnd A23 A24 B2 B10 B20 B22 A9 A10 A22 A23 Drain NA
SW +12 A25 B1 C1 A21 B1 B9 A11 A24 C6 Red NA
Snsr Gnd A26 B2 D21 D22 A7 A31 C7 C18 D9 D11 D12 D13 Black NA
Table 4. Series 2 EMS Pin Locations
Table 5. Series 1 EMS Pin Locations