AEM 30-2860 Coil-On-Plug COP Conversion Kit - Manual (Page 21)

Page 21 10-2860 B Series COP Instructions RevB 111117
SPECIFICATIONS
30-2860 B Series COP
Ignition Type
Inductive with Igniter
Ignition Channels 4
Timing Pattern 24 Crank, 1 Cam
Timing Pattern Signal 12 volt square wave
Ignition Trigger Signal 5 volt logic level falling edge trigger
Boost Level Up to 15 psi
Max Dwell Time See Table 1
Operating Voltage (nominal) 12 volts dc
RECOMMENDED PARTS
30-51XX
Analog Style Gauges
30-44XX Digital Style Gauges
30-2340 4 Channel UEGO Controller
30-4100 Digital Gauge Style UEGO Controller
30-5130 Analog Gauge Style UEGO Controller
30-2310 Inline UEGO Controller
30-2500 AQ1 Data Logger
30-2821 4 Channel Twin Fire CDI (Optional upgrade for higher boost levels above
15 psi, some wiring required)
REPLACEMENT PARTS
30-2840
4 Channel Igniter
30-3255 Honda EPM
30-2850 Coil
35-3860 B Series COP Harness
35-3861 EPM Harness
If further tuning help is needed be sure to visit the video gallery or performance
electronics forum at www.aemelectronics.com for comprehensive instructional videos
and information.