AEM 30-3812 Infinity Plug & Play Harnesses - Ford Coyote to Ford Racing Controls Pack User Manual
Page 13
Ford Coyote 5.0L V8
13
© 2014 AEM Performance Electronics
C1-45
Crankshaft
Position Sensor
VR+
Engine
E - 13
Crankshaft Position
(CKP+)
Differential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/Crank'
for options.
C1-46
Crankshaft
Position Sensor
VR-
Engine
E - 12
Crankshaft Position
Sensor (CKP-)
C1-47
Camshaft
Position Sensor
1 VR-
Engine
E - 29
VR Reluctance Sensor
(VRSRTN)
Differential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/Crank'
for options.
C1-48
Camshaft
Position Sensor
1 VR+
Engine
E - 46
Camshaft Position
Bank 1 In
(Passengerside
Exhaust) (CMP12)
C1-49
VR+_In_2
Engine
E - 47
Camshaft Position
Bank 2 In (Driverside
Exhaust) (CMP22)
Differential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/Crank'
for options.
C1-50
VR-_In_2
Engine
E - 48
Variable Reluctance
Sensor (VRSRTN2)
C1-51
VR-_In_3
---
Driven Left Wheel
Speed Sensor -
Differential Variable
Reluctance Zero Cross
Detection
See 'Driven Wheel Speed Calibration'
in the Setup Wizard 'Vehicle Speed'
page.
C1-52
VR+_In_3
---
Driven Left Wheel
Speed Sensor +
C1-53
DBW1 Motor -
Engine
E - 67
Throttle Actuator
Control Motor
(TACM-)
5.0A max Throttle
Control Hbridge Drive
+12V to close
C1-54
DBW1 Motor +
Engine
E - 68
Throttle Actuator
Control Motor (TACM
+)
5.0A max Throttle
Control Hbridge Drive
+12V to open
C1-55
Power Ground
Engine
E -11
Crankshaft Position
Sensor Shield
(SHDRTN)
Power Ground
Connect directly to battery ground
C1-56
Injector 6
Engine
E - 64
Fuel Injector Driver 6
(INJ6)
Saturated or peak and
hold, 3A max continuous
Injector 6
C1-57
Injector 5
Engine
E - 63
Fuel Injector Driver 5
(INJ5)
Saturated or peak and
hold, 3A max continuous
Injector 5
C1-58
Injector 4
Engine
E - 62
Fuel Injector Driver 4
(INJ4)
Saturated or peak and
hold, 3A max continuous
Injector 4
C1-59
Injector 3
Engine
E - 55
Fuel Injector Driver 3
(INJ3)
Saturated or peak and
hold, 3A max continuous
Injector 3
C1-60
Power Ground
Ford
Racing
PCM70 -
69
PWR Ground
Power Ground
Connect directly to battery ground
C1-61
+12V
Ford
Racing
PCM70 -
21 &
Engine E -
36
Injector and Digital
Cam Sensor +12V
Power
12 volt power from relay
12 volt power from relay. Relay must
be controlled by +12V Relay Control
signal, pin C1-29 above.
C1-62
Injector 2
Engine
E - 54
Fuel Injector Driver 2
(INJ2)
Saturated or peak and
hold, 3A max continuous
Injector 2
C1-63
Injector 1
Engine
Fuel Injector Driver 1
Saturated or peak and
Injector 1