Loading base session – AEM Infinity Supported Applications - Universal V8 Engine User Manual
Page 28
28
© 2014 AEM Performance Electronics
LOADING BASE SESSION
For each different combination of cam/crank triggers and distributors used, there is a provided base
session that must be loaded into the Infinity ECU. Once the base session has been loaded, the setup
wizards will need to be reviewed and the ignition timing will need to be synced using the InfinityV8
layout.
1. Connect USB comms cable between ECU and PC.
2. Turn ignition switch on.
3. Open InfinityTuner; connection status should be green and indicate ECU type.
4. Open Infinity V8 layout: Layout>Open Layout. Layout is located in My Documents>AEM>Infinity
Tuner>Layouts.
5. Upload base session: File>Import Calibration Data. Base session is located in My
Documents>AEM>Infinity Tuner>Sessions.
6. After session has loaded, turn ignition switch off, wait for main relay to click off, and then turn ignition
switch back on.
7. After comms have been reestablished, review Setup Wizard: Plug-ins>Wizard>Setup Wizard.