Downloadable files, Options – AEM Infinity Supported Applications - Universal V8 Engine User Manual
Page 3
Universal 8
3
© 2014 AEM Performance Electronics
DOWNLOADABLE FILES
Files can be downloaded from
. An experienced tuner must be available to configure
and manipulate the data before driving can commence. The Quick Start Guide and Full Manual describe
the steps for logging in and registering at
These documents are available for
download in the Support section of the AEM Electronics website:
OPTIONS
30-3805 Universal V8 Core Harness
This harness is the base of the universal V8 “modular” wiring harness. Harness comes with main relay for
proper power distribution, full length terminated legs for analog sensor inputs, and connectorized stub
leads for all outputs (coils, injection, idle air control, etc.) and cam/crank inputs. Add in the following
expansion harnesses as necessary for the particular application being used.
30-3805-00 GM Injector Adapter Harness
Adapter harness that mates EV1 style injectors in standard GM cylinder order (odd cylinders on one
bank, even cylinders on other) to 30-3805 Core Harness.
30-3805-01 Ford Injector Adapter Harness
Adapter harness that mates EV1 style injectors in standard Ford cylinder order (cylinders 1–4 on one
bank, cylinders 5–8 on other) to 30-3805 Core Harness.
30-3805-02 Single Channel Ignition Adapter Harness
Adapter harness that mates AEM Single Channel Coil Driver (30-2841) to 30-3805 Core Harness. Coil
driver takes 5V falling edge ignition trigger signal from Infinity and outputs a 12V rising edge signal. 12V
rising edge signal can either be used to trigger an inductive coil directly or trigger a single channel CDI
box (MSD 6A, etc.).
30-3805-03 VR Crank & VR Cam Adapter Harness
Adapter harness that mates variable reluctance (VR) crank and cam sensors to 30-3805 Core Harness.
Legs to each sensor are 48” long.
30-3805-04 VR Crank & Hall Cam Adapter Harness
Adapter harness that mates variable reluctance (VR) crank sensor and Hall Effect cam sensor to 30-
3805 Core Harness. Legs to each sensor are 48” long.
30-3805-05 Hall Crank & VR Cam Adapter Harness
Adapter harness that mates Hall Effect crank sensor and variable reluctance (VR) cam sensor to 30-
3805 Core Harness. Legs to each sensor are 48” long.
30-3805-06 Hall Crank & Hall Cam Adapter Harness
Adapter harness that mates Hall Effect crank and cam sensors to 30-3805 Core Harness. Legs to each
sensor are 48” long.