Lull 1044C-54 Series II Operation Manual - Manual (Page 132)

Section 7 - Lubrication and Maintenance
7-22 31200608
Transmission Oil
A. Transmission Oil Level Check
1. Apply park brake, shift transmission to "Neutral" and lower forks or attachment
to the ground.
2. Check transmission oil level with engine at idle and oil at normal operating
temperature.
3. If equipped, open engine access door.
4. Remove the transmission dipstick (3) and check oil level. The oil level should be
within the "HOT" zone (4).
5. If oil is low, add hydraulic fluid to bring oil up to the "HOT" zone.
6. Replace transmission dipstick.
7. If equipped, close and secure engine access door.
10
OW0970 OW1050
OV0570
HOT
COLD MIN
4
3