Lull 1044C-54 Series II Operation Manual - Manual (Page 33)

Section 2 - Pre-Operation and Inspection
2-9 31200608
2.5 OPERATOR CAB
The telehandler is equipped with an open or enclosed ROPS/FOPS cab.
WARNING
Never operate telehandler unless the overhead guard, cab structure and right
side glass or screen are in good condition. Any modification to this machine must
be approved by JLG to assure compliance with ROPS/FOPS certification for this
cab/machine configuration. If the overhead guard or cab structure is damaged,
the CAB CANNOT BE REPAIRED. It must be REPLACED.