Lull 1044C-54 Series II Operation Manual - Manual (Page 42)

Section 3 - Controls and Indicators
3-8 31200608
Transmission Control Lever
Direction of Travel Selection
Transmission control lever (1) engages forward or reverse travel.
• Push lever forward for forward travel; pull lever rearward for reverse travel. Move
lever to centered position for neutral.
• Forward or reverse travel can be selected while in any gear.
• When traveling in reverse, the back-up alarm will automatically sound.
• Drive in reverse and turn only at slow rates of speed.
• If transmission declutch function is not active (see page 3-5), do not increase
engine speed with the transmission in forward or reverse and the service brake
depressed in an attempt to get quicker hydraulic performances. This could cause
unexpected machine movement.
WARNING
TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before
shifting transmission control lever. A sudden change in direction of travel could
reduce stability and/or cause load to shift or fall.
OV0160
1
F
R
N