Lull 1044C-54 Series II Operation Manual - Manual (Page 47)

Section 3 - Controls and Indicators
3-13 31200608
Frame Level Joystick
The frame level joystick (2) controls the left to right frame level.
• Lift detent ring (3) and move the joystick left to rotate frame left; lift detent ring
and move the joystick right to rotate frame right.
• A level indicator is located above the front cab window to permit the operator to
determine whether the telehandler frame is level.
WARNING
TIP OVER HAZARD. Always move boom as low as possible while allowing for
best visibility of right hand mirror before leveling frame. Attempting to level
machine with boom raised could cause it to tip over.
OV0220
2
3