Lull 1044C-54 Series II Operation Manual - Manual (Page 97)

Section 5 - Attachments
5-29 31200608
Installation Procedure:
• Refer to “Attachment Installation” on page 5-9.
Operation:
• Always lower forks fully in mast before engaging load.
• To drive with a load, lower forks fully in mast and travel in accordance with the
requirements set forth in Section 1 - General Safety Practices.
• Use a signal person to assist in positioning load if necessary.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use mast to push or pull objects or load. Failure to
comply could cause object or load to fall.
WARNING
CRUSH HAZARD. Do not use Mast to push or pull objects or load. Failure to
comply could cause object or load to fall.