Lull 944E-42 Operation Manual - Manual (Page 78)

Section 5 - Attachments
5-6 31200354
Sample Capacity Chart
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-6); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
OU2390
XXXXXX
XXXXXXXXXX X
XXXX XX MAX
X
=XXXX XX MAX
XX MAX
XX
XX XX XX XX XX XX XX XX XX XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis.
Model XXXXX is used for demonstration purposes only.
Boom Extension
Indicator (arc)
Boom
Angle
Load zones indicate the maximum
weight that may be safely lifted.
Load center
must be equal to
or less than
value shown.
Attachment type, weight and
dimensions must be equal to or
less than the data shown.