Lull 944E-42 Operation Manual - Manual (Page 92)

Section 5 - Attachments
5-20 31200354
Dual Fork Positioning Carriage
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-4.
The middle joystick (1) controls lift/lower and extend/retract movement of the boom.
The front joystick (2) controls fork tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
To Fork Position:
The button (3) on the front joystick enables fork positioning.
• While depressing button move joystick left to shift forks out.
• While depressing button move joystick right to shift forks in.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
OZ3670
OU2460
2
1
3