Smittybilt 56602хх G.E.A.R. Rear Seat Cover User Manual
Installation instructions, G.e.a.r. rear seat cover
www.smittybilt.com
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Installation Instructions
G.E.A.R. Rear Seat Cover
(Universal Fit)
STEP 1: Position the bottom portion of the cover across the seat bottom. (Fig A) Fold the seat
forward and pull the side pieces of the cover back underneath the seat and secure with
strap. Now pull the straps from the front back under seat and secure to rear buckles.(Fig B)
(Fig A) (Fig B)
STEP 2: Position the top cover over the seat. (On 03-06 Wranglers simply lineup the latch flap with
latch in seat.) (Fig C) Attach by putting Velcro straps through buckles and then pulling back
and fastening. (See step 4 on how to attach Velcro straps on smaller seats) Pull bottom
straps through middle of seat and secure to rear buckles. (Fig D)
(Fig C) (Fig D) (Fig E)
STEP 3: After the cover is completely on you may adjust the straps in order to get a better fit. You can
adjust the cover and straps accordingly to access any special seat features like levers or
knobs.
NOTE:
Carefully read the following installation instructions for ease of installation.