Smittybilt DS20-4 Defender Rack Bracket User Manual
Installation instructions
WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Defender Rack Bracket
Application-Universal
Part # DS20-4
Parts Included Qty Parts Included Qty
Hardware Kit (DRB-6-HP)
1/4“ Lock Washer 8
¼” x 2 ¼” U-Bolt 4
¼” Nut 8
¼” Flat Washer 8
5/16” flat washer 32
Step 1:
Position the Defender Rack on your OEM rack. Make sure its evenly spaced
side to side and front to back.
Step 2:
Slide the U-Bolts around and up through the Rack strut plates and secure with
the included ¼” hardware. (Fig A) Make sure all hardware is tightened
completely.
(Fig A)
Please read instructions entirely before installing this product. Drilling is
required to install this product.