Blade ICE G8000 - Manual (Page 110)

RackSwitch G8000 Application Guide
110 „ Chapter 6: Quality of Service BMD00041, November 2008
DSCP-to-802.1p mapping
The switch can use the DSCP value of ingress packets to set the 802.1p priority value. Use the
following command to view the default settings.
Use the following command to turn on DSCP mapping globally:
Use the following command to perform DSCP-to-802.1p mapping:
RS G8000 (config)# show qos dscp
Current DSCP Remarking Configuration: OFF
DSCP New 802.1p Prio
-------- ---------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 1
9 0
10 1
...
51 0
52 0
53 0
54 0
55 0
56 7
57 0
58 0
59 0
60 0
61 0
62 0
63 0
RS G8000# qos dscp enable
RS G8000# qos dscp dot1p-mapping <DSCP value (0-63)> <802.1p priority value (0-7)>