Configuring radius – Blade ICE G8000 User Manual
Page 27
RackSwitch G8000 Application Guide
Chapter 1: Accessing the Switch
27
BMD00041, November 2008
Configuring RADIUS
Use the following procedure to configure RADIUS authentication on your switch.
1.
Configure the Primary and Secondary RADIUS servers, and enable RADIUS
authentication.
2.
Configure the RADIUS secret and enable the feature.
3.
If desired, you may change the default UDP port number used to listen to RADIUS.
The well-known port for RADIUS is 1812.
4.
Configure the number retry attempts for contacting the RADIUS server, and the timeout
period.
RS G8000 (config)# radius-server primary-host 10.10.1.1
RS G8000 (config)# radius-server secondary-host 10.10.1.2
RS G8000 (config)# radius-server enable
RS G8000 (config)# radius-server primary-host 10.10.1.1
key
<1-32 character secret>
RS G8000 (config)# radius-server secondary-host 10.10.1.2
key
<1-32 character secret>
RS G8000 (config)# radius-server port
<UDP port number>
RS G8000 (config)# radius-server retransmit 3
RS G8000 (config)# radius-server timeout 5