Blade ICE G8000 - Manual (Page 90)

RackSwitch G8000 Application Guide
90 „ Chapter 5: Spanning Tree BMD00041, November 2008
3. Configure port membership and define the Spanning Tree groups for VLAN 2.
Add server ports 3, 4, and 5 to VLAN 2. Add uplink ports 51 and 52 to VLAN 2. Assign
VLAN 2 to Spanning Tree Group 2.
N OTE – Each Spanning Tree Group (STG) is enabled by default.
RS G8000 (config)# vlan 2
RS G8000 (config-vlan)# enable
RS G8000 (config-vlan)# member 1
RS G8000 (config-vlan)# member 2
RS G8000 (config-vlan)# member 51
RS G8000 (config-vlan)# member 52
RS G8000 (config-vlan)# stg 2
RS G8000 (config-vlan)# exit