Eppendorf BioPhotometer Data Transfer - Manual (Page 16)

6 Operation
16
BioPhotometer Data Transfer Software — Operating Manual
6.6.4 Interrupt data acquisition
 Interrupt the data acquisition with the icon or select Disconnect in the menu File.
You can carry out measurements at the BioPhotometer plus without transferring the data.
 Restart the data acquisition via the icon or select Connect in the menu File.
6.7 Display files
6.7.1 Work area
The structure of the Work area is described separately(see Work area on page 10).
Data Output
 Via the rider Data Output you are directed to the corresponding measurement data display:
Abb. 3: Work area: Data Output
Fig. 3: Work area: Data Output
• Data in this format can be printed via the icon .
• Data cannot be exported in the Data Output area.
• The format Data Output is not filed in the Archive area.
Hint!
During an interruption of the connection between PC and BioPhotometer the method list and the
area Samples in the Work area are emptied. The measurement data is saved in the Archive area
in the corresponding archive file and can be called there.
The measurement data still remains in the area Data Output. The area Data Output is only
emptied after exiting the software.
6
Operation