Eppendorf BioPhotometer Data Transfer - Manual (Page 27)

27
7 Further functions
BioPhotometer Data Transfer Software — Operating Manual
The input window is activated:
3. Device ID: Enter device-ID e.g. serial number of BioPhotometer plus (optional entry).
4. Device type: select the appropriate device type.
5. Port: select COM Port of the PC.
6. Press Save and close the window with OK .
7.2 User administration
Additional functions with active user administration
• The software is only opened by the log-in of registered users.
• Column selection or display in table format is saved individually for every user.
• Transferred measurement data is assigned to the logged-in user. The filter User is activated in
the archive in the area Search Filter (see CSV Export from the Archive area on page 21).
Hint!
If do not know at which COM Port the BioPhotometer plus is located, you can search for it with
Scan.
Hint!
The user administration can be optionally activated. The standard setting of the software is not
designed for user administration.
7
Further functions