Eppendorf BioPhotometer Data Transfer - Manual (Page 22)

6 Operation
22
BioPhotometer Data Transfer Software — Operating Manual
Filter for units
1. Click with the right mouse button onto a column title Unit.
The following selection window opens:
2. Select Apply Unit Filter.
The following dialog window opens:
3. Select the corresponding unit and method from the list. Confirm the entry with OK.
The window shuts down and only the filtered measurement results are displayed.
4. In order to deactivate the filter with the right mouse button go to the respective column Unit.
The following selection window opens:
5. Deactivate the filter with Reset Unit Filter.
Further process sequence of CSV Exports as mentioned above (see p. 20).
6.8.3 CSV Export of calibration data
When transferring data of a method with calibration, the calibration data is filed under Calibrations
and the measurement data under Samples in the Work area and Archive area.
You can filter the calibration data in the archive with the Search Filter(see CSV Export from the
Archive area on page 21).
1. Select from the method list the corresponding method with the calibration.
2. Open the method-specific calibration with the rider Calibrations.
All acquired calibrations of the selected methods are displayed in chronological order
3. Ensure the correct allocation of measurement results and calibration.
4. For one method various calibrations can be listed in the table format Calibrations.
5. Select the calibration which is correct for your measurement results.
(see p. 20)Further process sequence of CSV Exports as mentioned above.
Hint!
There is no automatic allocation of measurement and calibration data.
6
Operation