Eppendorf BioPhotometer Data Transfer - Manual (Page 9)

9
5 Short Instructions
BioPhotometer Data Transfer Software — Operating Manual
5 Short Instructions
Requirement
• BioPhotometer plus is connected to the PC with the provided null modem cable.
• The set menu language of the Biophotometer plus is LANGUAGE ENGLISH or
LANGUAGE U.S.ENGL. It may lead to faulty data transfer with a different language setting.
• The software is installed.
1. Switch the BioPhotometer plus on.
2. Start the BioPhotometer Data Transfer Software via the shortcut
on the desktop.
The connected BioPhotometer plus is displayed by a corresponding message, e.g. Connected
device: BioPhotometer plus 6132 found at COM1.
3. Select a method at the BioPhotometer plus and start the measurement.
The data is automatically transferred during the measurement and is displayed in the section
Data Output of the Work area in the format of a device print.
4. For the results display in table format select the rider Samples in the Work area. With Methods
with calibrations the rider appears additionally Calibrations in which the calibration results are
displayed in table format.
You can print these formats directly via the icon Print
or by selecting the corresponding
print options with Print in the menu File.
5. You have two possibilities to export data from the areas Samples or Calibrations:
1. Excel Export
Click on the icon Excel Export .
A dialog window opens. After entering the file name and path the data is saved as CSV
file and automatically opened with Excel.
2. CSV Export
Click on the icon CSV Export .
A dialog window opens. After entering the file name and path the data is saved as CSV
file. The data can be opened with a calculation program.
You can also save new measurement data in an existing CSV file. The new data is
automatically inserted at the end of the table.
6. Exit the BioPhotometer Data Transfer Software with the menu File/ Exit.
4
Installation